Best Exhausts for the Kawasaki Z900 in 2023 - Ultimate Review

Welcome to our post on the best motorcycle exhausts for the Kawasaki Z900! If you’re a proud owner of this powerful and stylish machine, you know that the right exhaust can make a world of difference in terms of performance, sound, and overall riding experience. Whether you’re looking to enhance the bike’s performance, give it a more aggressive sound, or simply upgrade its aesthetics, we’ve got you covered. In this post, we’ll explore some of the top exhaust options available for the Kawasaki Z900, highlighting their features, benefits, and what sets them apart from the rest. So, if you’re ready to take your Z900 to the next level, let’s dive in and find the perfect exhaust for your ride!

Before checking our recommendation, we need to tell you that your Z900 is fitted with an exhaust for few reasons:

They send combustion gases away from rider and passenger.
They muffle noise, making it reasonably quiet.
They help the engine perform better.

Why should you replace your Z900 factory exhaust?

Your Kawasaki Z900 probably came with an exhaust system already on it. So why would you change it? There’s a bunch of good reasons to replace the stock exhaust:

Make it faster: The Z900 is actually pretty fast, however manufacturers had to meet a budget. That means that they might have been unable to product the best motorcycle exhaust pipes for your bike.
Make it lighter: Replacing, for example a big, steel system with an aftermarket titanium unit with a single short muffler can yield 15 pounds of more of weight. That can be 5% of the total motorcycle weight. Dropping the weight can be as good as increasing horsepower.
Save money: Usually OEM exhaust systems costs a lot more than aftermarket exhausts. So you’ll have your OEM exhaust secured while you ride with your aftermarket one.
Make it scream: You can change your bike sound, like from a sewing machine to afire-breathing monster.

How do aftermarket performance exhausts improve the Z900 performance?

Your engine can be thought of as a pump, moving a precisely metered mixture of air and fuel into itself, and moving burned air and fuel (exhaust) out. Improving that pumping efficiency is the most affordable way to pick up a few extra ponies. An exhaust that flows better will reduce the work the engine must perform when it expels exhaust gases, especially when coupled with improvements to the flow of air and fuel on the intake side.

What type of exhaust should I get for my Z900?

Motorcycle exhaust systems typically come in one of two types: * Mufflers only (also called slip-on or bolt-on systems). This type of exhaust retains the factory headpipe(s) and replaces just the muffler. * Full System. This type of exhaust replaces everything from the head(s) to the back of the bike.

Best Exhausts for Z900

SaleBestseller No. 1

YOSAYUSA Motorcycle Exhaust Stainless Steel Slip On Exhaust System Tail Pipe Muffler For Kawasaki Z900 2017 2018 2019 2020 2021 2022 2023 Black Muffler

【Fitment】：Fit For Kawasaki Z900 2017 2018 2019 2020 2021 2022 2023.
【Durability Performance】: Made of high quality stainless steel, corrosion resistance and rustproof.
【Package】：Comes with complete exhaust system.
【Elegant Design】Black titanium color appearance, noble and beautiful. Muffler Length: 310mm.
【Easy to install】User-friendly design, no additional adjustments required. Old equipment can be replaced directly, easy to use and easy to assemble and disassemble.

SaleBestseller No. 2

YOSAYUSA Motorcycle Exhaust 2" Inlet Slip On Muffler Midpipe Link Tail Pipe Muffler System for Kawasaki Z900 2017 2018 2019 2020 2021 2022

This motorcycle exhaust fitment fits for Kawasaki Z900 2017 2018 2019 2020 2021
Made of high quality stainless steel,Glossy Black surface, noble and beautiful
It's a good upgrade to increase the power performance for the motobike
There are no instructions included in this kit. Professional Installation Is Highly Recommended
Package including complete exhaust system and necessary accessories

Bestseller No. 3

KAJIMOTOR Motorcycle Exhaust Slip on Muffler Silencer Tail Link Motorcycle Exhaust Tips Midpipe System for KAWASAKI Z900 2017 2018 2019 2020 2021 2022 Black

【Suitable For】:Motorcycles exhaust pipe fit for Kawasaki z900 2017 2018 2019 2020 2021 2022 years
【Advantage】:Made of stainless steel.Make the muffler exhaust looks luxury and attractive.
【Great Sound】:Match your motorcycle with this exhaust slip on to make the sound sound great.
【Package Includes】:1 x Exhaust;1 x Pipe;1 x Clamp;2 x Springs;1 x Screw;1 x "Z"Bracket;1 x Spring Hook.
【Easy To Install】: The muffler exhaust relatively simple installation.No welding is required,The whole process should take you around 10-15 minutes.

Bestseller No. 4

ISTUNT Motorcycle Dual Outlet 12.2" Universal Exhaust Muffler Carbon Pattern Stainless Steel Slip on 2" Inlet with 38 to 51mm Welding Adaptor NO DB Killer Silencer

Send From California Warehouse, It Is Universal Muffler Can Be Used For Street Bike, Scooter, Quad And Any Other Bike With Pipe Diameter 35-51mm
Material: Stainless Steel, Length: 310mm, Connection Diameter: 51mm
Includes mounting clamp and a 38-51mm adaptor,Without Instruction,(If you do not have a 50.8mm diameter front or middle link pipe, you will need use 38-51mm adapter Welding on your Bike.)
Sounds Really Great;Come Without Removable DB killer But Dual Outlet; Fit for Left and Right side.
It's a good upgrade to increase the power performance for the bike.

Will my bike pass inspection with an Z900 aftermarket exhaust?

Some states have different requirements, our recommendation is to get an answer from your local police department, inspection station, state department or motorcycle shops.

How loud my bike will be?

Well, that depends on a few things. Nearly every aftermarket exhaust is louder than the factory exhaust. Some of the performance gain depends on not needing to silence the bike. If the exhaust is too loud, some manufacturers offer quieter baffles that you may install to bring the volume of the bike closer to stock.

Most of the exhausts often have a removable baffle in the tip of the muffler (commonly referred to as a dB killer) that can be removed or installed for similar manipulation of sound levels.

Performance is usually unaffected by the presence or lack of these baffles.

I heard I need to change my fuel delivery setup on Z900, too — true?

The answer depends on a lot of things. What kind of exhaust you have, and how you want your bike to behave! As a general rule, most slip-on or “muffler-only” exhaust systems do not require alterations in the fuel delivery, but even a bone-stock factory motorcycle will benefit from fuel management changes. If you are purchasing a full exhaust system, most manufacturers strongly recommend fuel system changes. Effectively, the exhaust helps the engine breathe better, but without adding more fuel to compensate for the greater ease with which the engine gets air, the ratio of fuel to air becomes imbalanced. That is known as a lean condition, which can make the temperature of the engine catastrophically high. Couple this situation with the fact that recent EPA regulations have been causing manufacturers to set bikes up quite lean from the factory, and a plan for poor performance and longevity is afoot! Typically, “richening” the air-fuel mix (more fuel per amount of air) is done by purchasing a fuel controller for a fuel-injected motorcycle, or jet kits for carbureted bikes. A dyno run and tuning session is often in order, so if you are not an experienced tuner, consider these costs in your performance budget. Before you purchase your exhaust, you might want to consider a few things:

Engine modifications work with each other. The sum of carefully selected parts usually leads to greater performance gains than any part offers individually.
Modifying your engine is very personal choice. Changing your bike to perform differently than the factory intended is possible and often desirable, but the changes must be made thoughtfully.
If you do not want to change your fuel delivery method, you may be best served by a simple slip-on system made by a manufacturer that does not require a fuel system change.

How do I keep my Z900 pipes from turning different colors?

The honest answer here is that you don’t. All pipes discolor to some degree, due to heating and cooling, the presence of environmental contaminants like tar, oil, and road debris, and the material the exhaust was created from. Stainless pipes, for example, turn gold. There is nothing wrong with this. It is a property of the alloy. Cruiser pipes often “blue,” especially near the heads. “Bluing” is a result of how the bike is running, not a defective finish. Camshaft choice, engine timing, carburetion, and other factors all affect exhaust temperature, the biggest determinant in keeping exhaust the color it was intended to be. These are some of the best ways we at ZLA know of to keep exhaust looking brand-spankin’ new: Make sure your bike is in a good state of tune. Properly gapped spark plugs and proper jetting go a long way to keeping pipes looking great. Buy double wall pipes. Effectively a pipe within a pipe, the outer visible pipe never achieves the high temperatures the inner pipe does, thus leaving it stain-free. Buy pipes with extensive heat shielding. Some brands of exhaust come with heat shields so voluminous, they appear to be the exhaust pipe. However, since there is a layer of cool ambient air between pipe and shield, the shields never attain the temperatures the inner pipe is subject to. A word about wrapping your pipes with fiberglass tape: Originally seen on the dragstrips to keep exhaust temperatures high to improve exhaust velocities out of the exhaust, pipe wrapping has become popular on the street, due to its unique look. It can and does tend to hold moisture near the metal, thus speeding the oxidation process. Most manufacturers consider wrapping pipes to be “abuse” and typically do not warrant problems stemming from wrapped pipes. Do it at your own risk!

How hard is it to install a motorcycle exhaust on a Z900?

Well, it depends. How good a “wrench” are you? What kind of system are you installing?
The answers vary greatly. We’ve put bolt-on exhausts on a bike and gone riding on it in under 20 minutes.

Consider your mechanical aptitude and understanding of the exhaust system and the related systems requiring disassembly to access the exhaust. Take stock of your tools on hand, and your ability to follow directions.

If any of these seem like obstacles, don’t be afraid to go to the mechanic and have a professional job done. Sometimes, an install from a competent shop for a fair price can give you peace of mind, while relieving you of any possible problems from an exhaust job that was tougher to tackle than originally estimated.

What about staying legal? What about C.A.R.B.?

Staying legal can be tricky. Ultimately, it’s up to each rider to follow the laws of the countries, states, and municipalities we live in, ride through, and visit. C.A.R.B. is the California Air Resources Board, and while not all riders fall under its jurisdiction, the laws it promulgates frequently have far-reaching effects for nearly all North American riders.

What do I need to know before I order?

Before you order your Kawasaki Z900 exhaust you need to know a few things:

Year, make, model, and engine displacement are imperative. Guessing leads to the wrong parts being sent out.
An exhaust system usually includes just the pipes. Re-using gaskets works sometimes, but not every time. Fresh gaskets are always a good idea.
Hardware is another component that often suffers, as are oxygen sensors. Typically made of mild steel, hardware can rust, bind up, or break due to the heat cycling it receives over the course of its life, and oxygen sensors are often damaged to the point of unusability upon removal. Be prepared to find or purchase parts that may break while you are working, or purchase them beforehand. A word of caution: Oxygen sensors can be removed with normal wrenches, but specially designed sockets and wrenches exist and they typically extract sensors unbroken with a much higher degree of reliability than standard hand tools. Consider one!
Once an exhaust shows signs of being mounted, it is not typically returnable. We do not send out exhausts that have previously been installed. Consequently, we cannot take a return of one in such a state.
You need to know how an exhaust will work with your bike. An exhaust system is an aftermarket modification. They are usually made for stock motorcycles, so if your rig deviates from stock, the onus of responsibility for determining if two components will “play nicely” together must rest with you. If you have a question or concern, call us. If we don’t know, we’ll find out.
In a similar vein, some exhausts require modifications to your motorcycle. You may need to relocate components such as oxygen sensors, and possibly remove componentry like high-mount centerstands. Sometimes, directions can be less than explanatory, and light fabrication work can be required.
Finally, parts often must be reused. Brackets, side stand bumpers, flanges, and clamps are often pieces that need to be pressed into service once again. If yours are missing or damaged, you may need to obtain them from your dealer prior to your exhaust installation.